The Importance Of Using Threaded PVC Pipe Fittings
Threaded PVC pipe fittings have become popular for use in conjunction with steel material as they provide a higher degree of resistance. It is therefore common practice to apply thread locker to threaded fittings. The reason for using threaded pipe fittings is that they can resist greater heat and hence can be used for a longer period of time than steel material. This can be attributed to the fact that steel material can get soft if subjected to a lot of heat and the PVC material can withstand the pressure caused by the increased temperature for a longer period of time.
When it comes to threaded male PVC fittings, there are generally two available types. They are known as full pipe and half pipe fittings. Full pipes are normally used where there is a need for a mating connection between two or more pipes of the same length. Half pipes are generally used where there is a coupling between two smaller pipes. There are also threaded PVC pipe fittings of varied sizes available that are commonly used where there is a need for connecting different sized pipe.
For threaded PVC pipe fittings, one has to ensure that the threaded portion is properly loaded so that its diameter matches that of the pipe being threaded. Thus, you would not want a threaded part that is either too small or too large for the pipe. If you beloved this article and also you would like to receive more info about similar resource site please visit the web page. Moreover, the PVC pipe should be threaded at the joints so that it does not crack when stressed by the pressure. When you invest in threaded PVC fittings, ensure that you buy high quality products from a renowned manufacturer so that you do not face any health problems in the future.
While purchasing threaded PVC fittings, you can go in for either self-adhesive or fully machine threaded fittings depending on your requirements. Self-adhesive fittings are widely used where there is no need for precision machining. The advantage of using self-adhesive tape is that the tape can be reused. In other words, you can save money on the manufacturing cost because the tape can be reused on many occasions without having to be changed. On the other hand, fully machine threaded fittings are made by machining tiny holes in the pipe so that they can be easily joined.
Stress cracking can occur if the threads become overheated. In such cases, PVC threaded fittings can reduce the stress crack by sealing the end of the threaded section. However, this can only be done if the PVC pipe is made using high quality materials and if the pipe is heat treated. If you buy threaded fittings made from low quality material, you may find them prone to stress cracking over time.
When you are ready to purchase threaded pvc fittings, make sure that you buy those that have one and a half turns of thread in them. This means that you should buy three-eights, six-eights or twelve eights of thread for each threaded section. This ensures that the threads do not overheat leading to the failure of the threaded section. Further, ensure that you buy the fittings from reputed stores so as to avoid being cheated.
